MAX5481, MAX5482 pdf datasheet

The MAX5481¨CMAX5484 10-bit (1024-tap) nonvolatile,
linear-taper, programmable voltage-dividers and variable
resistors perform the function of a mechanical
potentiometer, but replace the mechanics with a pinconfigurable
3-wire serial SPI?-compatible interface or
up/down digital interface. The MAX5481/MAX5482 are
3-terminal voltage-dividers and the MAX5483/MAX5484
are 2-terminal variable resistors.
The MAX5481¨CMAX5484 feature an internal, nonvolatile,
electrically erasable programmable read-only
memory (EEPROM) that stores the wiper position for initialization
during power-up. The 3-wire SPI-compatible
serial interface allows communication at data rates up
to 7MHz. A pin-selectable up/down digital interface is
also available.
The MAX5481¨CMAX5484 are ideal for applications
requiring digitally controlled potentiometers. Two end-toend
resistance values are available (10k¦¸ and 50k¦¸) in a
voltage-divider or a variable-resistor configuration (see
the Selector Guide). The nominal resistor temperature
coefficient is 35ppm/¡ãC end-to-end, and only 5ppm/¡ãC
ratiometric, making these devices ideal for applications
requiring low-temperature-coefficient voltage-dividers,
such as low-drift, programmable gain-amplifiers.
The MAX5481¨CMAX5484 operate with either a +2.7V to
+5.25V single power supply or ¡À2.5V dual power supplies.
These devices consume 400¦ÌA (max) of supply
current when writing data to the nonvolatile memory
and 1.0¦ÌA (max) of standby supply current. The
MAX5481¨CMAX5484 are available in a space-saving
(3mm x 3mm), 16-pin TQFN, or a 14-pin TSSOP package
and are specified over the extended (-40¡ãC to
+85¡ãC) temperature range.