MAX1144, MAX1145 pdf datasheet

The MAX1144/MAX1145 are 150ksps, 14-bit ADCs.
These serially interfaced ADCs connect directly to
SPI?, QSPI?, and MICROWIRE? devices without
external logic. They combine an input scaling network,
internal track/hold, clock, and three general-purpose
digital output pins (for external multiplexer or PGA control)
in a 20-pin SSOP package. The excellent dynamic
performance (THD ¡Ý 90dB), high speed (150ksps in
bipolar mode), and low power (8.0mA) of these ADCs
make them ideal for applications such as industrial
process control, instrumentation, and medical applications.
The MAX1144 accepts input signals of 0 to +6V (unipolar)
or ¡À6V (bipolar), while the MAX1145 accepts input
signals of 0 to +2.048V (unipolar) or ¡À2.048V (bipolar).
Operating from a single 3.135V to 3.465V analog digital
supply, powerdown modes reduce current consumption
to 0.15mA at 10ksps and further reduce supply
current to less than 20¦ÌA slower data rates.
A serial strobe output (SSTRB) allows direct connection
to the TMS320 family digital-signal processors. The
MAX1144/MAX1145 user can select either the internal
clock or an external serial-interface clock for the ADC to
perform analog-to-digital conversions.
The MAX1144/MAX1145 feature internal calibration circuitry
to correct linearity and offset errors. On-demand
calibration allows the user to optimize performance.
Three user-programmable logic outputs are provided
for the control of an 8-channel mux or PGA.
The MAX1144/MAX1145 are available in a 20-pin SSOP
package and are fully specified over the -40¡ãC to
+85¡ãC temperature range.
Applications
Industrial Process Control
Industrial I/O Modules
Data-Acquisition Systems
Medical Instruments
Portable and Battery-Powered Equipment