远端模块固件升级失败的解决方法

远端模块固件升级失败。

其中Reason=[STRING] 会显示失败信息。告警含义见hwRuMngFirmwareUpdateFail。先根据失败提示信息初步判断。

# displayremote-unit upgrade information查询当前中心交换机可用固件版本。

system-view
[HUAWEI] display remote-unit upgrade information
Firmware information:
-------------------------------------------------------------------------------
Type Version From Note
-------------------------------------------------------------------------------
APP 220410000 Startup software -
POE 7686 Startup software -
BIOS 220225001 Startup software -

Remote-unit during cooling down:
-------------------------------------------------------------------------------
Type ConnectInterface FailCnt CoolDownInSeconds
-------------------------------------------------------------------------------

Waiting for restart to apply new firmware's remote-unit information:
-------------------------------------------------------------------------------

# displayremote-unit verbose查看远端模块的认证结果，Authen result为Success表示认证成功，其他表示认证不成功，请联系维护确认。

[HUAWEI] display remote-unit verbose

Total number: 1
------------------------------------------------------------------------
ESN :219801176801XXXXXXXX
Name :-
ID :1
Device MAC :XXXX-XXXX-XXXX
Device type :-
Item :-
Manufacture date :-
Up time :0 day, 2 hours, 29 minutes, 52 seconds
APP version :220410000
POE version :-
BIOS version :220225001
Connect interface :MultiGE0/0/5
Disk usage :44%
Memory usage :30%
Temperature :28(°C)
Mac usage :0%
Disk space(MB) :16
Status :Normal
Authen result :Success
------------------------------------------------------------------------

步骤 3检查当前升级的情况，确定当前升级模式和状态。

# displayremote-unit upgrade information查询远端模块升级状态，Remote-unit during cooling down可以看到是否有升级失败处于冷却期的远端模块。

[HUAWEI] display remote-unit upgrade information
Firmware information:
-------------------------------------------------------------------------------
Type Version From Note
-------------------------------------------------------------------------------
APP 220410000 Startup software -
POE 7686 Startup software -
BIOS 220225001 Startup software -

Remote-unit during cooling down:
-------------------------------------------------------------------------------
Type ConnectInterface FailCnt CoolDownInSeconds
-------------------------------------------------------------------------------

Waiting for restart to apply new firmware's remote-unit information:
-------------------------------------------------------------------------------
Type ConnectInterface NextVersion(APP/POE/BIOS)
-------------------------------------------------------------------------------

Upgrading remote-unit information:
-------------------------------------------------------------------------------
Type ConnectInterface Firmware Percent
-------------------------------------------------------------------------------
MultiGE0/0/5 APP 14%

# displayremote-unit upgrade record查询远端模块升级记录信息。

[HUAWEI] display remote-unit upgrade record
-------------------------------------------------------------------------------
StartTime ConnectInterface Firmware UpdateResult
-------------------------------------------------------------------------------
2022/04/14 2039 MultiGE0/0/5 APP Success
2022/04/14 2057 MultiGE0/0/5 BIOS Success

# 远端模块视图下，执行命令行display this查询是否配置了去使能升级，有upgrade disable回显表示全局去使能升级了，需要使能一下。

[HUAWEI] remote-unit
[HUAWEI-remote-unit] display this
#
remote-unit
upgrade disable
#
return
[HUAWEI] remote-unit 1
[HUAWEI-remote-unit-1] display this
#
remote-unit 1
upgrade disable
bind interface MultiGE0/0/5
#
return
[HUAWEI-remote-unit-1] upgrade enable

远端模块视图下，可执行命令行upgrade { app | bios | poe } force强制升级固件。

[HUAWEI-remote-unit] remote-unit 1

[HUAWEI-remote-unit-1] upgrade app force
Info: Successfully added to the upgrade list.

步骤 5请收集日志信息和配置信息，并联系技术支持人员。设备诊断信息可以通过displaydiagnostic-information命令收集。