EzLINX?用户指南

2512784 2021-04-29 | pdf | 238.07KB | 次下载 | 2积分

资料介绍

This version (10 Feb 2021 20:20) was approved by Robin Getz.The Previously approved version (04 Nov 2012 16:46) is available.

ezLINX? iCoupler? Isolated Interface Development Environment

ezLINX? iCoupler? Isolated Interface Development Environment

The ezLINX iCoupler Isolated Interface Development environment provides developers with a cost-effective, plug and play solution for evaluating eight physical Layer, digitally-isolated communication standards(USB, RS-422, RS-485, RS-232, CAN, SPI, I2C and LVDS). The Blackfin ADSP-BF548 processor is used to run the uCLinux operating system and allows for easy customization through the open source hardware and software platform. Development time is significantly reduced for embedded designers and system architects who are designing and evaluating isolated communication standards.The Interfaces on ezLINX use ADI's isolated transceivers with integrated iCoupler and isoPower? digital isolator technology.

Quick Start Installation Setup Guide

The following guides give a complete step-by-step guide for the initial setup of the ezLINX board, including software installation for the ezLINX application, driver installation and setting the IP address. Before starting the setup guide, check that you have all of the necessary items from the following list to complete the setup process:

Evaluation Kit Contents

EZLINX-IIIDE-EBZ Evaluation board
USB A to mini USB B Cable
Power supply
ezLINX Software DVD

Installation Instructions

Select the operating system you are using from the list:

Windows XP Quick Start installation
Windows Vista 32-bit/64-bit Quick Start Installation
Windows 7 32-bit/64-bit Quick Start Installation

Hardware

The Hardware of the ezLINX iCoupler isolated interface development environment contains the ADSP-BF548 blackfin processor with 64MB of RAM and 32MB of Flash memory. The Isolated Physical layer communication standards are implemented using ADI's isolated transceivers with integrated iCoupler and isoPower technology. Routing between the various communication standards is implemented at the hardware level. Included are the following:

Isolated USB using the ADuM3160
Isolated CAN using the ADM3053 Signal and Power Isolated CAN transceiver
Isolated RS-485/RS-422 using the ADM2587E Signal and Power Isolated RS-485/RS-422 transceiver
Isolated RS-232 using the ADM3252E Signal and Power Isolated RS-232 transceiver
Isolated I2C using the ADuM1250 and ADuM5000
Isolated SPI using the ADuM3401, ADuM3402 and ADuM5000
Isolated LVDS using the ADuM3442, ADuM5000, ADN4663 and ADN4664

Download Schematics

Download PCB Manufacturing Files

Download Bill of materials

The ezLINX? Development Platform also includes the following:

Hirose FX8 120P-SV(91) Extender Connector for daughter board connections.
RS-232 DB-9 Console Connector
1.2V, 2.5V, 3.3V, 5V Regulated Output Voltages

A full list of jumper configurations for the ezLINX hardware can be found here.

Software

Sample PC Application Software

The ADSP-BF548 Blackfin processor is running open source uCLinux kernel and sample application. The sample PC Application integrates with the ezLINX hardware platform via isolated USB, allowing for a complete plug and play evaluation and development experience with 8 isolated communication standards.

Download PC Application Install files

Download PC Application Source Code

Sample PC Application Software User guide

The sample PC Application is available for

Windows XP
Windows Vista
Windows 7

Software User Guide for the Sample PC Application.

Kernel Update Guide

The ezLINX board allows for the embedded kernel of the Blackfin? Processor to be updated with the latest version of the kernel image file. This will improve the functionality and reliability of the board.

For the step-by-step kernel update guide and the latest image file, follow the link below:

Kernel Update Guide

Kernel Restore Guide

If the kernel image file becomes corrupted then the ezLINX board cannot be connected to the PC application. In this case the factory reset feature can't be used and in order to re-establish the connection the kernel must be restored from the back-up location in the ezLINX board's flash memory. This process can also be used to revert the embedded software on the ezLINX board back to its original version.

For the step-by-step kernel restore guide, follow the link below:

Kernel Restore Guide