74HC299 pdf datasheet

MM54HC299/MM74HC299
8-Bit TRI-STATE? Universal Shift Register
General Description
This 8-bit TRI-STATE shift/storage register utilizes advanced
silicon-gate CMOS technology. Along with the low power
consumption and high noise immunity of standard CMOS
integrated circuits, it has the ability to drive 15 LS-TTL
loads. This circuit also features operating speeds comparable
to the equivalent low power Schottky device.
The MM54HC299/MM74HC299 features multiplexed inputs/
outputs to achieve full 8-bit data handling in a single
20-pin package. Due to the large output drive capability and
TRI-STATE feature, this device is ideally suited for interfacing
with bus lines in a bus oriented system.
Two function select inputs and two output control inputs are
used to choose the mode of operation as listed in the function
table. Synchronous parallel loading is accomplished by
taking both function select lines S0 and S1 high. This places
the TRI-STATE outputs in a high impedance state, which
permits data applied to the input/output lines to be clocked
into the register. Reading out of the register can be done
while the outputs are enabled in any mode. A direct overriding
CLEAR input is provided to clear the register whether
the outputs are enabled or disabled.
The 54HC/74HC logic family is functionally as well as pinout
compatible with the standard 54LS/74LS logic family. All
inputs are protected from damage due to static discharge by
internal diode clamps to VCC and ground.
Features
Y Typical operating frequency 40 MHz
Y Typical propagation delay: 20 ns
Y Low quiescent current: 80 mA maximum (74HC)
Y High output drive for bus applications
Y Low quiescent current: 1 mA maximum